Unwired DIY BC Lampholder Kit For A Wall Sconce Fitting Solid Brass Brushed Antique Finish

Unwired DIY BC Lampholder Kit For A Wall Sconce Fitting Solid Brass Brushed Antique Finish
Details

Hand finished by Dave@Abitofbrass

Current Stock: 1

£9.51

Unwired DIY BC Lampholder Kit For A Wall Sconce Fitting Solid Brass Brushed Antique Finish

I do not make light fittings........but I can sell you the parts to make your own!
This is a kit that contains all the parts to make a wall sconce fitting.
The wiring is awkward trying to get through the 90 degree bend at the ball when assembled so the trick is to feed the wires through the ball first and then assemble the rest of the fitting around it.
Otherwise I would assemble the fitting for you.
The following are the parts in the kit...
Solid brass plate fixing plate 66mm diameter
85mm long ZP all-thread nipple
Nut and serrated lock washer
Grommets to protect the cable on the angle
75mm solid brass sleeve to cover the all-thread
Solid brass 90 degree ball
10mm all-thread
Solid brass BC lampholder
Solid brass fixing screws (3/4" long or 1½ long)
3 x 12" of 0.75mm singles 
All in a brushed antique finish
Projection from wall to centre of lampholder is 102mm
Lampholder body for shade is 26mm
Maximum depth under the shade ring is 26mm
Feel free to email me any questions

 

  • Product Code:
    N209
  • Brand:
    Bitofbrass
  • Condition:
    New